Adhesive Tape Manufacturer - Wholesale Industrial Tape | EONBON

16 years industrial
tape manufacturer

How to apply anti slip tape on stairs

Views: 40 Author: EONBON Marketing Department Publish Time: Origin: Site

The infrastructure construction in public construction areas is now complete. Stairs can be seen everywhere, and slip incidents are also increasing, especially in winter or rainy days, when the stairs are too slippery and it is easy to fall. How to prevent falling and slipping accidents from happening? This is also the serious problem we are facing now. Based on market surveys and many years of experience in the industry, the editor has comprehensively sorted out some relevant knowledge to provide a basis for reference for the elimination of hidden safety hazards in the anti-skid problem of stairs.

anti slip tpae for stairs.jpg

The cross section of the stairs is small, and products such as anti-slip agent for tiles are not suitable for such small-area and complex floor tiles. Therefore, the most suitable anti-slip trick is to stick the floor anti slip tape (anti slip sticker); the anti-slip sticker is a highly durable tape. It has good corrosion resistance to most chemical components, and also has strong water resistance, oil resistance, temperature resistance and UV resistance. The life span is 1-5 years.

Nowadays, there are many kinds of anti slip tapes and non-slip materials on the market, and the quality of products even varies greatly. Kunshan Yuhuan Package Materials Co., Ltd. mainly produces non-slip tapes and stickers on the surface of ore sand. We use high-quality raw materials and acrylic pressure-sensitive adhesives, selected sand, and the sand surface layer is thickened by 20%, which increases the service life. It can withstand at least 1 million steps; this is the advantage of this product and the difference from similar products. Of course, if you want to get a better use effect, you also need to master the correct method of pasting.

How to apply anti slip tape on stairs:

1. Confirm that the temperature is appropriate (it is not suitable to cure the glue if it is too cold or too hot), and the distance between the patches should be 12mm50mm.

2. The surface is thoroughly cleaned and completely dry, which will affect whether the sticker can be used stably for a long time. If necessary, primer can be applied;

3. Do not touch the adhesive with your hands, so as not to affect the adhesiveness

4. Cut the anti slip sticker according to the required size and tear off the backing paper;

5. Smoothly spread on the surface, and use a rubber reel to ensure that the glue is completely adhered to the surface;

4. Then use a roller or rubber hammer to press firmly;

5. Apply adhesive to the welt according to the situation. After the construction is completed, wait for it to air dry. Do not move the tape within 24 hours.

Through the steps of how to stick anti slip tape on the stairs explained above, the correct use method is the most important step that affects the final use effect. I hope everyone can use it correctly~ If you have any other questions, you can also Click the link below to get in touch with the manufacturer online.



×

Contact Us

captcha